Development of an unsteady lifting line model for wind turbine applications
Carlos Renan dos Santos, Post doctoral Research Fellow Institute for Energy Technology
Similar Posts
Wind Turbine Noise at Source – The Impact of the Design
Low-noise wind turbine design Aeroacoustic noise sources and their characterisation Design of wind turbine gearboxes with respect to noise
Wind Turbine Yaw System: Mechanical Parts
The primary mechanical parts of the Yaw System are This section provides information about the relationship of the yaw bearing, yaw ring, and brakes. Yaw rings The yaw ring is a large gear that engages the pinion gears of the yaw motor gearboxes. Because these gears carry high loads, proper lubrication is important to prevent…
Composites Materials in Wind Turbine Blades
Composite Materials It is a macroscopic combination of two or more distinct materials, which will make the composite possess superior and unique properties in relation to the individual properties of its constituents. Composites are obtained by making combinations between materials from different families. Example: Composites are a number of layers (laminas) bonded by a resin…
Mitigation of Wind Turbine Design Load Uncertainties
Anand Natarajan, Senior Specialist, Nacelle Technical Management, Vestas