|

Wind Turbine Blade Handbook

ByWindmills Tech Editor

Find Mølholt Jensen, CEO and Board member Bladena hos Bladena

Rune Kirt, CEO at KIRT x THOMSEN

John Dalsgaard Sørensen, Professor at Aalborg Universitet

Lars Damkilde, Professor at Esbjerg Institute of Technology

Christian Berggreen, Professor – Head of Group Lightweight Structures & Head of Laboratory – DTU Structural Lab

Torben Juul Larsen, Lead Specialist, Loads, Innovation & Concepts, Vestas Wind Systems A/S

Mads Lübbert, Local Functional Manager, Mechanics at DIS – CREADIS Engineering & Consulting

Similar Posts

| |

Wind Turbine Gearbox Force and Stress Analyses

ByWindmills Tech Editor

Three different types of forces act on gears and bearings in a gearbox. They are gravitational forces, frictional forces, and contact forces. The most significant are contact forces, due to the magnitude of the contact stresses that these forces are generating on the surfaces of the moving parts during operation. Contact force occurs when the…

| |

Wind Turbine Yaw Gearbox

ByWindmills Tech Editor

Power from the yaw motors is transmitted to the yaw ring through a reduction gearbox which provides both speed reduction and torque multiplication. This yaw drive uses a planetary gearbox with the motor mounted vertically at the top. Planetary gearboxes are often used on commercial wind turbines because they offer high reduction ratios from a…

|

National Guidelines and Human Perception of Noise

ByWindmills Tech Editor

Survey of noise regulations and guidelines across the EU Angeliki Koulouri, Research Officer, European Wind Energy Association – EWEA, Belgium Affective response to noise from wind turbines Sabine von Hunerbein, University of Salford, UK https://www.linkedin.com/in/sabine-von-h%C3%BCnerbein-29887211/ Noise impacts: is wind turbine noise really so different from other types of environmental noise Ian Flindell, Institute of Sound…